Hitachi HSBT67, Quick Start Manual

Page: 2 / 3

TOP VIEW
Rear Panel and Bluetooth Connection
Sound Bar Control Buttons
Remote Control
Power On/Off
INPUT
D1/D2
SUBWOOFER
Output
MUTE
Bluetooth ®
HEARING AID Mode
TONE M-G-S
3D/SURR
L1/L2
NITE Mode
Cycle through the inputs:
Bluetooth, D1, D2, L1, L2.
Press to select input D1,
press again to select input D2.
SUB + (increase)
SUB – (decrease)
Press to turn off the volume,
press again to restore the volume.
Press this button to
select the Bluetooth Input.
This listening mode is designed
to improve the sound for the
listening impaired.
Music is the default mode, press to
set the TONE for Game TONE Mode,
press again for Sports TONE Mode.
Press once to activate the 3D Sound
Mode. Press again to activate the
Surround Sound Mode, press again
to return to normal listening.
Press to select input L1 input,
press again to select the L2 input.
This listening mode activates
AUTO-VOLUME with the fi rst press to
limit program volume peaks and to raise
whispers so they can be heard.
A second press of the NITE button will
turn AUTO-BASS off for the quietest
listening mode possible. A further press
of the NITE Mode button will return to
the normal listening mode.
Caution: Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type. Batteries shall not
be exposed to excessive heat such
as sunshine, fi re or the like. How to Install Batteries:
Before using Sound Bar remote
control you must install batteries.
1. Use 2 “AAA” batteries. 2. Replace the battery
compartment cover.
VOLUME
VOL + (increase)
VOL – (decrease)
Power On/Off
INPUT
VOLUME
VOL + (increase) VOL – (decrease)
Cycle through the inputs:
Bluetooth, D1, D2, L1, L2
Smart Power Energy Saving Feature:
1. The Sound Bar will enter energy saving STAND-
BY mode 30 minutes after you turn off your TV.
2. Turn your TV back on and the Sound Bar will
will automatically “wake-up” from the STANDBY
mode and function as your TV speaker.
Smart Power functions only when the Sound
Bar goes into STANDBY mode by “timing out”
after ~30 minutes. Pressing the Sound Bar power
button will turn off the Smart Power feature.
Caution: Reduce the unit’s volume
before connecting headphones or
other devices to avoid hearing or
speaker damage.
ENERGY STAR ® Qualifi ed.
INPUT VOL– VOL+
CAUTION: Lower the volume on television, source device and Sound Bar when connecting or
disconnecting devices to avoid damage when TV, source device and Sound Bar are turned on.
1. Connect AC Power Adapter to Sound Bar:
Connect to
120VAC/60Hz
wall outlet ONLY
Connect 24VDC to rear panel jack p j
nect t
(c) The Sound Bar’s Voice Cues and front display
say “Discovering” when looking for an audio
device and announce “Your device is connected”
when the Sound Bar is
successfully paired
with your audio device.
(a) Turn on Bluetooth in your audio source device
such as a music player, smartphone or tablet
(consult your device’s operating manual for details).
TV Coaxial out (Digital)
TV Optical out (Digital)
2. TV to Sound Bar connections … Use any one of the types shown below:
TV Headphone out
(Analog)
Sound Bar Inputs (model HSBT67 shown)
TV Outputs
Connection for Optional Subwoofer
3. Connecting other devices is easy:
(music player, games, USB drive)
Sound Bar Inputs (model HSBT67 shown)
Music Player
(Headphone out)
TV audio out (Analog)
Blu-ray
Player
(Digital out)
4. NO W IRES NO W IRES with Bluetooth Bluetooth® :
Sound Bar Inputs (model HSBT67 shown)
Sou d a pu s ( od S 6 s o )
Game (Analog out)
Blu-ray Player
USB
External Drive
appears in your audio source
device’s Bluetooth device list.
(b) Point the Sound Bar remote control at the Sound
Bar’s front panel, then press & hold the remote’s
Bluetooth button until “Hitachi Sound Bar”