EN-17
Setting the Panorama Mode
This mode is designed to make it easier to take a series of shots then stitch them
together with software to make a single image. You can capture a photographic subject
that won’t fit into a single frame, such as a landscape, and stitch it together later with a
program such as Arcsoft Panorama Maker
®
4.0 application.
1. Press the
MODE
button, and set the camera mode to [
], and press the
SET
button.
2. Select [Panorama] with the
e
/
f
/
c
/
d
buttons, and press the
SET
button.
3. Select the photographic direction with the
e
/
f
buttons.
4. Shoot the first image.
The next image appears beside the previous image.
5. Orient the camera so that the second frame overlaps a small portion of the
photographic subject of the first image and press the shutter button to capture the
next image.
6. Follow the same steps to capture subsequent images in the sequence.
7. Finish the sequence by pressing the
MENU
button or switch to another mode after
the last image has been recorded.
Taking Images When the Smile Feature Is On
With the camera’s new “smile detection” function, this camera detects smiles so you
do
not miss those special moments in life.
1. Press the
MODE
button, and set the camera mode
to [
], and press the
SET
button.
2. Select [Smile Detection] with the
e
/
f
/
c
/
d
buttons, and press the
SET
button.
3. Compose the image, and press the shutter button
down fully.
4. Once the camera detects a smile, it will
automatically capture 3 images (by default, the flash
mode setting is set to
d
).
If the [Capture Md.] is set to [Single], the camera
will only capture an image after it detects a smile.
When capturing group shots (if the number of
people is more than 1), the camera will
automatically capture the image(s) when it
detects two smiles.
If the camera does not detect a smile within 5
seconds, the camera returns to preview display.
Press the shutter button once again to reactivate this function.
00214
00214
00214
SCN
SCN
SCN
SET
