ENGLISH
17
HAS-WM05
$
Procedure for installing exterior parts
Installing exterior parts
$
-1. Attach the front cap (F) at the front end of the Arm bracket (IN).
Hook the tabs on either side in the holes in the arm bracket (IN).
$
-2.
Attach the cable cover.
Insert the two tabs (1) and (2) in the cable cover with the two holes (1) and (2) in the LCD projector.
Secure the cable cover screw (3) to the LCD projector (3).
Front cap (F)
Tab
Hole
1
2
3
1
2
3
Route the cables through the holes
in the top of the cable cover.
16
HAS-WM05
7. Fine adjustment of vertical position
• Repeat steps 1 to 7 to fine adjust the image to the screen.
See page 20 for details on adjustment range.
#
-4.
Tighten the five loosened fastening screws (1) to (5).
A
B
Turn the height adjusting screw to adjust the height.
A
B
Supplied Allen wrench (O)
Use the included hex wrench (O).
（1）
（2）
（4）
（5）
（3）