ENGLISH
7
HAS-WM03
224(8.82)
262 (10.3)
11.8 (0.46)
146
(5.74)
34.6
(1.36)
238 (9.37)
489 (19.3)
c
4
c
5
c
1
c
2
c
3
a
b
(*1)
257
〜
297
(10.1
〜
11.7
)
19
〜
59
(0.7
〜
2.3
)
16:10 screen
a
b
c1
c2
c3
c4
c5
Diagonal size (inches) mm (inches)
mm (inches)
mm (inches)
mm (inches)
mm (inches)
mm (inches)
60
128(5.0)
308(12.1)
1116(43.9)
252(9.9)
490(19.3)
343(13.5)
70
198(7.8)
346(13.6)
1288(50.7)
293(11.5)
531(20.9)
412(16.2)
80
268(10.5)
383(15.1)
1460(57.5)
330(13.0)
568(22.4)
483(19.0)
90
338(13.3)
421(16.6)
1633(64.3)
369(14.5)
607(23.9)
554(21.8)
100
408(16.1)
459(18.1)
1805(71.1)
407(16.0)
645(25.4)
622(24.5)
Base bracket attachment diagram
(Full screen: Reference value for 1,280 × 800 pixel image.)
Note:
The wall hole center is 34.6 mm (1.36 inches) to the right of the screen center.
Unit: mm (inches)
Screen center
Screen thickness
Wall hole center
Imp
or
ta
nt
d
im
en
si
on
Important dimension
Install 70 mm (2.8 inches) or more
away from the top edge of the
screen.
4:3 screen
a
b
c1
c2
c3
c4
c5
Diagonal size (inches) mm (inches)
mm (inches)
mm (inches)
mm (inches)
mm (inches)
mm (inches)
60
104(4.1)
219(8.6)
1133(44.6)
167(6.6)
405(15.9)
319(12.6)
70
170(6.7)
242(9.5)
1309(51.5)
190(7.5)
428(16.8)
385(15.2)
80
236(9.3)
265(10.4)
1484(58.4)
212(8.3)
450(17.7)
450(17.7)
90
302(11.9)
288(11.3)
1659(65.3)
236(9.3)
474(18.6)
517(20.4)
100
368(14.5)
310(12.2)
1834(72.2)
258(10.2)
496(19.5)
583(23.0)
(*1) For a 50 mm thick screen
Size of images that can be projected with screen sizes of up to 100 inches.
* Use of the supplied template sheet will facilitate positioning of the base bracket.
(Full screen: Reference value for 1,024 × 768 pixel image.)
Note:
Note that projection distance
b
will vary by ±3% depending on what product is used.
Screen center
Cable cover
6
HAS-WM03
2
Attach the base bracket (B) to a wall using the anchor
bolts (M8).
The holes in the base bracket (B) are oval to permit horizontal adjustment.
For details on the length and number of the anchor bolts (M8) that are required,
see “Tools needed for installation” on page 2.
Refer to pages 7-8 for instructions
on attaching the base bracket.
■ Use anchor bolts to attach the base bracket (B) to a wall.
■ Use M8 anchor bolts.
■ Use anchor bolts of a length that suits the material, strength and thickness of the wall so that the pullout strength of
each bolt meets or exceeds 2,000 N.
■ If the bolts cannot satisfy the required strength specifications, increase the number bolts.
WARNING
■ When attaching the wall mount unit to a wall covered with a layer of plaster or other weak finishing material, make
sure the anchor bolts reach into the underlying concrete.
■ As shown in the figure, at least eight anchor bolts, two in each corner are required.
Concrete
Concrete
Weak material
Weak material
Anchor bolt
Anchor bolt
(B)
M8 anchor bolts (8 or more)
M8 anchor bolts
(8 or more)
Base bracket (B)
Anchor bolt
Concrete
