ENGLISH
16
HAS-K252
1. Fine adjustment of horizontal
position
2. Fine adjustment of horizontal
keystone
3. Fine adjustment of vertical
keystone
4. Fine adjustment of lateral
position
5. Fine adjustment of image size
6. Fine adjustment of focus
For details, see the User’s Manual for the LCD projector.
0
-3. Make a rough focus adjustment.
For details, see the User’s Manual for the LCD projector.
0
-4. Make fine adjustments.
Follow the steps below to turn the adjusting screws and adjusting knobs to adjust the image.
1 2
3
4
5
Blue
Green
Red
17
HAS-K252
7. Fine adjustment of vertical position
1. Loosen the screw on on the lower right side.
2. Turn the height adjusting screw to adjust the height.
3. After completing adjustments, retighten the
loosened screw.
Tightening torque: 0.98 N•m (10 kgf•cm)
Supplied Allen
wrench (I)
Note:
Do not loosen these three
screws.
•
Repeat steps 1 to 7 to fine adjust the image to the screen.
See page 22 for details on adjustment range.
A
A
B
B
0
-5. Retighten the six previously loosened securing screws.
Tightening torque: 0.98 N•m (10 kgf•cm)
