Performing maintenance
38
◦
Account Service
◦
Administer User Accounts
◦
Add User Account
• Reset Options
Running an iLO self-test
Running an iLO self-test checks the status of certain server hardware components.
Procedure
1.
On the iLO Configuration Utility screen, click
iLO Self-Test
.
The self-tests are run, and the results screen appears.
• Tests that ran successfully are followed by a green checkmark.
• Tests that failed are followed by a red "X".
For more information about iLO self-tests and about how to interpret and troubleshoot the results, see
the
iLO User Guide
.
Management Settings
Configuring Manager iLO Management Settings
Procedure
1.
From the main Intelligent Provisioning page, click
Perform Maintenance
>
iLO Configuration
>
Management Settings
>
Manager
.
2.
Configure the following settings:
• IPv6 Multicast Scope
• Multicast Announcement Interval
• Multicast Discovery
• Multicast Time to Live
• iLO Federation Management
• Trusted Certificate Required
• Mass Storage Authentication Required
• USB Ethernet Adapters Enabled
• USB Flash Drive Enabled
• iLO Service Port Enabled
• Video Presence Detect Enabled
• Clear Rest API Status
