Hitachi H8/Tiny 3664F User Manual Download Page 4 | Manualshive

Page: 4 / 56

Hitachi H8/Tiny 3664F User Manual Download Page 4

HTEB1

User manual

Issue 0.2

Page 4

07/2002

1 Overview

1.1 System Development Kit content

Thank you for purchasing our product. If you take care on the different

hints in this manual you will have great success in software development
with this microcontroller. Please refer to the documents listed in appendix.

The System Development Kit
contains the following parts:

Evaluation-Board HTEB1
CD-ROM
User manual (this document)
RS232 cable (1.8m, DSub9, male-

female)

4 plastic feet for the HTEB1

Carefully remove the board from the shipping carton. Check first if there
are any damages before power on the evaluation board.

1.2 Hardware description

The Hitachi-Tiny-Eval-Board (HTEB1) is a low cost multifunctional

evaluation board for the Hitachi Tiny H8/3664F microcontroller. It can be
used stand alone for software development and testing or as a simple
target board. You can use the Flash-Download-Tool (FDT) for
programming the target code or work with a debug system (E10T) at the
provided connector. The board allows the designer immediately to start

with the software development before his own final target system is
available.

This eval-kit provides some additional hardware e.g. 8 LED’s, a 2*16

Character LCD, 4 key’s, a PC-AT-keyboard connector, an I2C-connector
and more for hard- and software evaluation. All peripherals are used by
some software application notes. Please refer chapter 3.

«
...
2
3
4
5
6
...
»

Summary of Contents for H8/Tiny 3664F

























































Reviews:

No comments