--- 18 ---
Reassembly of the Handle Holder [47] section
Mount four Dampers (B) [43] and four Handle Dampers [49] to the Housing Ass'y [103], then mount two
Handle Dampers (B) [48] to the Housing Ass'y [103] in the direction of arrow marked on Handle Damper (B)
[48]
surface. Next, mount two Handle Holders [47] to the Housing Ass'y [103] and insert two Handle Pins
[92] into two 17.5 mm dia. holes of the Handle Holders [47]. Finally, tighten two Seal Lock Hex. Socket Hd.
Bolts M8 x 16 [30] with two Washers [100]. At this time, align the notch of the flange portion of the handle pin
with the notch of the Handle Holder [47] and then hold the flange portion of the Handle Pin [92].
Fig. 17
Handle Damper (B) (2 pcs.) [48]
Handle Holder (2 pcs.) [47]
Damper (B) (4 pcs.) [43]
Handle Pin (2 pcs.) [92]
Washer (2 pcs.) [100]
17.5 mm dia. holes
Handle Damper (4 pcs.) [49]
Housing Ass'y [103]
Seal Lock Hex. Socket Hd. Bolt M8 x 16 (2 pcs.) [30]
Summary of Contents for H 70SD
Page 30: ......