Hitachi GGX-CC9M4G2X1, User Manual

Page: 65 / 190

44
[Example] The procedure to set separately QueueDepth of hfcldd0 to 20 while setting the other
adapters across all the ports to 10 is shown below on Linux:
(Step 1) Refer to the set value of hfcldd0.
Each item name: The current driver operation value (value set to hfcldd.conf/FLASH-
ROM) is
indicated.
(-) indicates yet-to-be-set.
Figure Sample of hfcmgr –p display
# ./hfcmgr -p hfcldd0
Time: xxxx/xx/xx xx:xx:xx
--------------------------------------------------------
WWPN:50000870003021e0 Device:hfcldd0 [LinkUp]
--------------------------------------------------------
Connection Type : Point to Point[fabric] (Point to Point)
Link Speed : 1Gbps (1Gbps)
Max Transfer Size : 16 MB (-)
Login Delay Time : 2 sec (3)
Link Down Time : 15 sec (-)
Reset Delay Time : 19 sec (-)
Preferred AL-PA : 0x01 (-)
Reset Timeout : 20 sec (-)
Abort Timeout : 8 sec (-)
Queue Depth : 32 (-)
Machine Check : 8 (-)
Allowed : 5 (-)
Target Reset Mode : off (-)
LUN Reset Delay : 0 (-)
Interrupt Type : Legacy Mode (-)
Logging Mode : default (-)
Login Target Filter : none (-)
# ./hfcmgr –p
1: WWPN:50000870003021e0 Device:hfcldd0 [LinkUp]
2: WWPN:50000870003021e2 Device:hfcldd1 [LinkUp]
Enter number > 1
If any port is not passed as a command-
line parameter, enter the number of the
port here to display the port information.