manualshive.com logo in svg

Hitachi G1000, User Manual

The Huawei G1000 user manual is available for free download on our website. This comprehensive manual provides detailed instructions and information about the features and functions of the Huawei G1000 smartphone. Enhance your user experience by accessing the manual at manualshive.com.

Share
Download
background image

Note:

•

Pairs in an SI consistency group must reside in the same storage system.

Because of this, the SI pairs that are associated with both the GAD P-VOL

and the S-VOL cannot be registered to the same consistency group.

•

When you use GAD pair volumes to create an SI pair, you must specify

the physical LDEV ID, not the virtual LDEV ID.

Related topics

•

Limitations when sharing GAD and ShadowImage volumes on page 2-8

•

SI operations and GAD pair status on page 2-8

•

GAD operations and SI pair status on page 2-11

Limitations when sharing GAD and ShadowImage volumes

When a GAD pair is deleted with the P-VOL specified, the virtual LDEV ID of

the S-VOL is deleted. If you delete the pair with the S-VOL specified, the

virtual LDEV ID of the P-VOL is deleted. When the virtual LDEV ID is deleted,

the server does not recognize the volume.

Any operation that deletes the virtual LDEV ID of a volume used as a

ShadowImage volume cannot be performed.

SI operations and GAD pair status

The ability to perform a ShadowImage pair operation depends on the SI pair

status and GAD pair status. The following tables show SI pair operations and

whether they can be performed (Yes, No) with the listed GAD status. The

information assumes the required SI status for the operation.

2-8

System requirements

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Reviews:

No comments

Related manuals for G1000

Ubiquiti Bullet Quick Start Manual preview
Bullet
Brand: Ubiquiti Pages: 40
TRENDnet TW-200 Specifications preview
TW-200
Brand: TRENDnet Pages: 2
YOKOGAWA SMARTDAG+ GM10 User Manual preview
SMARTDAG+ GM10
Brand: YOKOGAWA Pages: 22
Olympus Dock & Done S-DVD-100 User Manual preview
Dock & Done S-DVD-100
Brand: Olympus Pages: 156
YearGoo 2.5” Solid State Drive Manual preview
2.5” Solid State Drive
Brand: YearGoo Pages: 6
Hamlet HRDSL742 User Manual preview
HRDSL742
Brand: Hamlet Pages: 122
B&B Electronics Elinx EIR508 Series Quick Start Manual preview
Elinx EIR508 Series
Brand: B&B Electronics Pages: 2
IBM 87401RU Installation And User Manual preview
87401RU
Brand: IBM Pages: 110
KYLAND Technology KIEN3016A Hardware Installation Manual preview
KIEN3016A
Brand: KYLAND Technology Pages: 19
Planet FGSW-2620 User Manual preview
FGSW-2620
Brand: Planet Pages: 13
RouterBOARD OmniTik UPA-5HnD Quick Setup Manual And Warranty Information preview
OmniTik UPA-5HnD
Brand: RouterBOARD Pages: 4
TP-Link Archer AX10000 Quick Installation Manual preview
Archer AX10000
Brand: TP-Link Pages: 2
IBM IBM 2212-40H Installation And Initial Configuration Manual preview
IBM 2212-40H
Brand: IBM Pages: 90
Hamlet HRDSL108W Quick Installation Manual preview
HRDSL108W
Brand: Hamlet Pages: 6
Boca Systems BocaVision WT120 User Handbook Manual preview
BocaVision WT120
Brand: Boca Systems Pages: 28
ZyXEL Communications VMG8825 Quick Start Manual preview
VMG8825
Brand: ZyXEL Communications Pages: 36
Aegis Secure Key 3.0 Quick Start Manual preview
Secure Key 3.0
Brand: Aegis Pages: 1
ZLAN ZLAN5443A User Manual preview
ZLAN5443A
Brand: ZLAN Pages: 13

Brands by name

Popular brands

Load more brands