--- 5 ---
4-5. Soft Grip Handle
The double-layer molded handle consists of a nylon resin base covered with a soft plastic layer to ensure a soft
touch and firm, non-slip grip of the handles.
4-6. Dust-proof Ball Bearing Thanks to the Labyrinth Construction
The ball bearing retainers at both sides of the armature have a labyrinth construction to make the ball bearings
dust-proof.
4-7. Wheel Guard Angle-Adjustable without Using a Tool
By following the procedure described below, the newly developed tool-less wheel guard can be adjusted to a
desired angle without using any tool.
[Installation and adjustment of the wheel guard]
Set the Wheel Guard Ass'y
[40] <40>
on the Packing Gland
[31] <31>
.
With the Lever
[35] <35>
closed, tighten the Bolt M8 x 22
[36] <36>
until the wheel guard is locked in position.
Open the Lever
[35] <35>
for angle adjustment of the wheel guard. (If the wheel guard is difficult to turn, loosen
the Bolt M8 x 22
[36] <36>
and readjust the wheel guard.)
Be sure to close the Lever
[35] <35>
after finishing adjustment before starting operation.
When the Lever
[35] <35>
becomes dull in motion, lubricate the sliding area between the Set Piece
[38] <38>
and
the Lever
[35] <35>
.
Fig. 8
Fig. 6
Fig. 7
Labyrinth
Bearing cover (A)
Armature shaft
Ball bearing (6301DDCM)
Fan
Labyrinth
Bearing bushing
Commutator
Ball bearing
(6000VVCM)
Dust seal
Housing
Rubber ring (A)
Summary of Contents for G 18SCY
Page 55: ......
