5
8. When the machine is not use, the power source should
be disconnected.
9. Be sure to switch OFF and disconnect the attachment
plug from the receptacle to avoid a serious accident
before the depressed center wheel is assembling and
disassembling.
10. RCD
The use of a residual current device with a rated residual
current of 30 mA or less at all times is recommended.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
G10SS2 / G12SS2 / G13SS2: Disc Grinder
Read all safety warnings and all instructions.
Always wear eye protection.
V
Rated voltage
Alternating current
n
Rated speed
min
-1
Revolution or reciprocations per minute
Switching ON
Switching OFF
Disconnect mains plug from electrical outlet
Warning
Class
II
tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package
contains the accessories listed in the below.
(1) Wrench .........................................................................1
(2) Side handle ...................................................................1
Standard accessories are subject to change without notice.
APPLICATIONS
○
Removal of casting
fi
n and
fi
nishing of various types of
steel, bronze and aluminum materials and castings.
○
Grinding of welded sections or sections cut by means of
a cutting torch.
○
Cutting of synthetic concrete, stone, brick, marble, and
similar materials.
SPECIFICATIONS
Model
G10SS2
G12SS2
G13SS2
Voltage
(110V, 120V, 220V, 230V, 240V)
Power input
600 W
Rated speed
11500 min
-1
(110V : 12000 min
-1
)
Wheel
Outer dia.
100 mm
115 mm
125 mm
Hole dia.
16 mm
22.23 mm
Thickness
4 mm
6 mm
Peripheral speed
72 m/s
80 m/s
Weight (only main body)
1.7 kg
1.8 kg
NOTE
Due to HITACHI’s continuing program of research and development, the speci
fi
cations herein are subject to change
without prior notice.
0000Book̲G10SS2.indb 5
0000Book̲G10SS2.indb 5
2015/10/15 17:04:57
2015/10/15 17:04:57
