- 24 -
Q1E-EP1019
6. Maintenance and Safety Inspection
1)
After using the probe, the magnetic sensor attachment, the
spacer for EZU-RV2S and the elasto coupler, it should be cleaned
and disinfected or sterilized following “
5. Reprocessing
Procedure
”, then store it in a cool and dark place avoid high
temperature and humidity, direct sunlight.
2)
Visually inspect the surface of the probe head, the housing,
the cable and the connector for any crack, scratch or
denaturalization. If you find any damage, do not use the probe,
and contact a service support immediately.
3)
Visually inspect the surface of the magnetic sensor attachment,
and the spacer for EZU-RV2S for any crack, deformation or
denaturalization. If you find any damage, do not use them and
contact a service support immediately.
4)
Visually inspect the surface of the elasto coupler for any
crack, deformation or denaturalization. If you find any damage,
do not use the elasto coupler, and immediately contact a
service support.
