Hitachi EUP-B712 Instruction Manual Download Page 5

Page: 5 / 51

(4)

Q1E-EP1412

Definition of symbol
The following symbol is also used for HITACHI Ultrasound Probes.

Location Symbol

Definition

Probe

connector

This instrument complies with Directive 93/42/EEC
relating to Medical Device and Directive
2011/65/EU relating to RoHS

Probe
connector

IPX7

IPX7 mark
See section 1.6.

Probe

connector

Type BF APPLIED PART

Probe

connector

General warning sign

Probe
connector

Warning; dangerous voltage

Probe

connector

Caution; Biohazard

Probe
connector

Follow the instruction manual to operate this
instrument. If not avoided, may result in injury,

property damage, or the equipment trouble.

Probe

connector

STERRAD sterilization compatibility mark

Probe
connector

Upper Limit of Temperature;

The probes that are applicable to Ethylene Oxide
Gas Sterilization use symbol of “Upper Limit of

Temperature: 55 degrees”.

Probe
connector

Do not waste the instrument as general waste.
Comply with a local regulation.

Probe

connector

Rx Only

By prescription only. U.S. Federal Law restricts

this device to sale on order of a physician only.

Summary of Contents for EUP-B712




















































Search results

Summary of Contents for EUP-B712

Reviews:

Related manuals for EUP-B712

Brands by name

Popular brands

Hitachi EUP-B712, Instruction Manual

Search results

Summary of Contents for EUP-B712

Reviews:

Related manuals for EUP-B712

Brands by name

Popular brands