INSTALLATION MANUAL FOR MULTI-KITS
Models:
E-102SN, E-162SN, E-242SN and E-302SN
!
NOTE:
Hand over this installation manual to the next installation work
personnel.
1 APPLICABLE OUTDOOR UNITS
These multiple pipe connecting kits can be applied to the R410A
SET-FREE series:
2 TRANSPORTATION
Transport the product as close to the installation location as practical
before unpacking.
"
CAUTION:
Do not put any material on the product.
3 BEFORE INSTALLATION
■
Confirm the number of the following parts by referring to the model
printed on the package before unpacking.
■
Do not put foreign materials into the parts. Check to confirm that
no foreign materials are inside the parts before the fixing work is
initiated.
Name of parts
E
-10
2S
N
E
-16
2S
N
E
-24
2S
N
E
-30
2S
N
Figure
Branch Pipe for Gas Line
1
Branch Pipe for Liquid Line
1
Insulation for Gas Line
1
Insulation for Liquid Line
1
Reducer for Gas Line
–
1
1
4
Expander for liquid Line
2
1
1
1
Acces
sories
Tape
2
2
2
2
!
NOTE:
In any of these parts is not contained, please contact your
distributor
4 INSTALLATION WORK
4.1. Piping Connection Size
■
The end of the multi-Kits is finished as shown in the following
figures. Cut the end of the pipe to meet with the pipe size.
E-102SN
GAS
L
INE
LI
Q
U
ID
LI
N
E
E-162SN
GAS
L
INE
LI
Q
U
ID
LI
N
E
E-242SN
GAS
L
INE
LI
Q
U
ID
LI
N
E
E-302SN
GAS
L
INE
LI
Q
U
ID
LI
N
E
