40
chapter 2_Setups
Cautions:
• During and after charging, the battery will be warm, but this does not
indicate a fault.
• If the POWER indicator on AC adapter/charger blinks, remove the battery
once, and then reattach it. If the POWER indicator still blinks, the battery
may be faulty.
• If the ambient temperature is a little too high or low, the CHG. indicator or
CHG.80 indicator on AC adapter/charger will blink at 6-second intervals.
In this case, charging is possible, but it will take longer than usual.
• If the ambient temperature is too low or too high, the CHG. indicator or
CHG.80 indicator on AC adapter/charger will blink at one-second inter-
vals, showing that charging will not be possible.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Attaching Battery to DVD Camera/recorder
Caution:
• Make sure that the battery is securely at-
tached: Incomplete attachment could cause
the battery to fall, resulting in damage.
1. Pull out the viewfinder fully and raise it.
2. Align the top of battery with the top
surface of battery attachment platform
of DVD camera/recorder.
3. While fitting the battery onto the DVD camera/recorder, slide it
downward until a click is heard.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Removing Battery
After using the DVD camera/recorder, remove the battery from it.
Cautions:
• For safety, be sure to turn the DVD camera/recorder off before attaching
or removing the battery.
• If the battery remains attached, minute level current will flow even if the
DVD camera/recorder is off, and the battery will discharge.
1
2 · 3
E-P37-53
01.1.29, 1:50 PM
Page 40
Adobe PageMaker 6.5J/PPC