4 - 14
4-3 Display of Error Codes and Troubleshooting
Restriction:
The information included in this section is exclusively for service personnel: Do not disclose it to
persons other than service engineers.
The DVD video camera/recorder is equipped with a self-diagnostic function: If the DVD video
camera/recorder detects any problem, it will choose an appropriate error code (4-digit alphanumeric)
and store it in
fl
ash memory: Display the error code to perform troubleshooting, according to the
content.
4-3-1 Displaying error codes and clearing them
(1) Display method
1) Use the battery or AC adapter/charger to power the DVD video camera/recorder.
2) Set the power switch to “HDD”. If a DVD is loaded, this function can also be executed with the
power placed in the “DVD” position. Then operate the DVD video camera/recorder while watching
the LCD monitor or view
fi
nder.
3) Press the DISC NAVIGATION button to display the thumbnail screen.
4) Display the error code screen using the following button operation:
Simultaneously press the SLEEP/RESTART, REC and buttons.
(2) Display clearing method
1) Press the STOP/CANCEL button to restore the thumbnail screen. To restore the normal screen,
press the STOP/CANCEL button again or press the DISC NAVIGATION button.
Troubleshooting > Display of Error Codes and Troubleshooting