Hitachi DVPF2EUK, Instruction Manual

Page: 18 / 57

– 18 – EN
2C15
R L
ANALOG
AUDIO OUT
R
L
Stereo system
Dolby Digital decoder
or
DTS decoder
CONNECTION TO AN AUDIO SYSTEM
Notes
¡
If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio out-
put in the setup mode. (See page 45)
¡ If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode. (See
page 45)
¡ Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out-
put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also
damage the speakers. (See page 45)
¡
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
¡ Set Dolby Digital and DTS to off for audio output in the setup mode for method 1 only. Playing a DVD using
incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to page 45 to set ON
for Dolby Digital and DTS)
¡ If you use the OPTICAL jack, remove the protective cap.
COAXIAL OPTICAL
DIGITAL
AUDIO OUT
COAXIAL OPTICAL
or
AUDIO
DVD/VCR
Method 1
Audio Input Jacks
Digital Audio
Input Jacks
Analog Audio Out
(DVD only)
Digital Audio Out
Method 2
• Method 1 DVD/VCR + Stereo system
• Method 2 DVD/VCR + Dolby Digital decoder or DTS decoder