1 - 8
4. Miscellaneous
4.1 Flash ROM software version display, error display, etc.
Press the VIRTUAL SURROUND button on player and, while holding it down, simultaneously press and hold down the
POWER button for 5 seconds.
The software version of flash ROM will appear (P00xx, xxx).
Pressing the cursor up/down buttons on remote control or player will display the player internal data.
The cursor left/right buttons on remote control or player are used for P00 (-P5) <-> P10 (-19) and P10 (-19) <-> P20 (-P99).
The following table lists the player internal data (however, not all items are supported):
4.2 If “no PLAY” appears in the display
The following lists the possible causes of “no PLAY” display (and “Disc Error” in OSD):
a-f of “aP20 bcdef” that appears in the display are defined in bits (displayed in octal notation).
#
Function
Display
Content
1
Software version
P00 XX.XXX
Flash ROM version area is read and displayed
2
Player region
P01 XX
Setup and NTSC/PAL are initialized for each destination.
3
Model No.
P02 abcde
------
4
Microcode version
P03 XXXYY
XXX: Version; YY: Revision (a-z = 1-26)
5
SH microprocessor ROM version
P04 XX.XXX
SH7020 mask ROM version
6
-
P 5 ----
------
7
-
P11~P19
------
8
Cause of unplayability
OP20 XXXXX
Possible reasons that “no PLAY” appears are displayed.
9
-
P21
------
10 Drive information
P22 XXXXX
Information on drive is displayed
11 -
P23 ----
------
12 -
P26~P99
------
#
Display
Content
1
aP20 XXXXX
bit0: UDF error
bit1: Drive time-out error
2
XP20 bXXXX
bit0: VCD auto-stop 1 (reserved)
bit1: VCD auto-stop 2 (reserved)
bit2: No disc
3
XP20 XcXXX
bit0: PAL disc cannot be played since NTSC video output has been set.
bit1: NM auto-stop 1 (disc can be played again)
bit2: NM auto-stop 2
4
XP20 XXdXX
bit0: VMG1 acquisition error
bit1: Drive error
bit2: Version manager error (CD-I, PC software CD-ROM, upgraded CD-R)
5
XP20 XXXeX
bit0: Disc format
bit1: Region code acquisition error
bit2: Region code of player does not match that of disc.
6
XP20 XXXf
bit0: Reserved
bit1: Authentication error (disc or title key)
bit2: Disc acquisition error
