-4-
2. Reassembly of the clutch unit
(1) Mount the Stopper Spring
[29]
, Stopper (A)
[28]
, Sleeve
[9]
, and Spring
[8]
to the Front Case
[10]
in
this order (Fig. 3).
(2) Screw the Nut
[7]
into the Front Case
[10]
(Fig. 4).
Align mark (i) on the Nut
[7]
with mark (ii) on the Front Case
[10]
, and then screw in the Nut
[7]
. Rotate
the Nut
[7]
about a turn clockwise to align mark (i) on the Nut
[7]
with mark (ii) on the Front Case
[10]
.
At this time, confirm that the “Y” surface of the Nut
[7]
is almost flush with the “Z” surface of the Front
Case
[10]
.
Fig. 3
Spring
[8]
Stopper (A)
[28]
Stopper Spring
[29]
Sleeve
[9]
Front Case
[10]
Fig. 4
“Y” surface
Screw-in end position
Screw-in start position
Nut
[7]
“Z” surface
Mark (i)
“Z” surface
“Y” surface
Front Case
[10]
Mark (ii)
(Axis of Click Spring
[11]
mount position)
Nut
[7]
“Y” surface
About 2 mm
