CAUTION
To prevent accident, make sure to turn the switch
o
ff
, then disconnect the battery and the drilling
tool.
6. Replacing
the
fi
lter (Fig. 16, 17, 18)
If
the
fi
lter inside the dust box becomes clogged, the
dust extraction performance declines.
As a guideline, replace the
fi
lter after every 100 times
that the dust box becomes full.
WARNING
When replacing the
fi
lter, in order to prevent an
unlikely accident, be sure to turn o
ff
the tool’s
switch and remove the battery from the tool
body.
(
1
)
Insert a
fl
at-head screwdriver into the groove on the
side of the
fi
lter cover and remove the
fi
lter cover.
(
Fig. 16
)
2
1
Dust box
Filter cover
Groove of
dust box
Fig. 16
(
2
)
Remove the
fi
lter from inside, and replace it with a
new one.
(
Fig. 17
)
Dust box
Filter
(
internal
)
Seal packing
Fig. 17
NOTE
When removing the
fi
lter cover, be sure that the seal
packing of the dust box does not peel o
ff
.
(
1
)
While keeping the dust extractor system level and
upright, press and hold the dust box latches and pull
the dust box out of the dust extractor system. Dispose
of the dust inside.
(
Fig. 13, 14
)
2
1
Dust box latch
Dust box
Fig. 13
Dust box
Filter
(
internal
)
Fig. 14
CAUTION
To prevent accident, make sure to turn the switch
o
ff
, then disconnect the battery and the drilling
tool.
(
2
)
When cleaning the
fi
lter, face the opening in the dust
box downward and tap the dust box gently to knock
the dust out.
(
Fig. 14
)
(
3
)
If dust is adhered to the intake port
(
mesh covering
)
or the area around it, clean it o
ff
with a soft brush.
(
Fig. 15
)
Dust extractor system intake port
(
mesh covering
)
Fig. 15
11
English
000Book̲Dust extractor system̲NA.indb 11
000Book̲Dust extractor system̲NA.indb 11
2017/12/05 13:42:58
2017/12/05 13:42:58
