11
Model
DS18DVB2
No-load speed (Low/High)
0 – 400/0 – 1400/min
Drilling
Wood
(Thickness 18 mm)
38 mm
Metal
(Thickness 1.6 mm)
Steel: 13 mm, Aluminum: 13 mm
Driving
Machine screw
6 mm
Wood screw
8 mm (diameter)
×
75 mm (length) (Requires a pilot hole)
Rechargeable battery
EB1820L (2.0 Ah): Ni-Cd 18 V
Weight
2.4 kg
SPECIFICATIONS
POWER TOOL
Capacity
CHARGER
Model
UC24YFA
Charging voltage
7.2 – 24 V
Weight
0.6 kg
1
Plus driver bit (No. 2
×
55L) ..... 1
DS18DVB2
2
Charger (UC24YFA) ........................ 1
3
Plastic case ...................................... 1
Standard accessories are subject to change without
notice.
STANDARD ACCESSORIES
OPTIONAL ACCESSORIES (sold separately)
1. Battery (EB1820L)
Optional accessories are subject to change without notice.
APPLICATIONS
䡬
Driving and removing of machine screws, wood
screws, tapping screws, etc.
䡬
Drilling of various metals.
䡬
Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latches
to remove the battery (see
Figs. 1
and
2
).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2
).
CHARGING
Before using the driver drill, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charger’s
pilot lamp will blink in red. (At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in
Fig. 3
.
CAUTION:
䡬
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as a
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light up
continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals.) (
See
Table 1
)
(1) Pilot lamp indication
The indications of the pilot lamp are shown in
Table 1
, according to the condition of the charger or
the rechargeable battery.