manualshive.com logo in svg

Hitachi DS 14DVB, Technical And Service Manual, Page: 2 / 23

Share
Download
Hitachi DS 14DVB Technical And Service Manual Download Page 2

Page

CONTENTS

1. PRODUCT NAME ...........................................................................................................................1

2. MARKETING OBJECTIVE .............................................................................................................1

3. APPLICATIONS ..............................................................................................................................1

4. SELLING POINTS ..........................................................................................................................1

4-1. Selling Point Descriptions .............................................................................................................. 2

5. SPECIFICATIONS ..........................................................................................................................3

6. COMPARISONS WITH SIMILAR PRODUCTS ..............................................................................4

7. WORKING PERFORMANCE PER SINGLE CHARGE ..................................................................5

8. PRECAUTIONS IN SALES PROMOTION .....................................................................................6

8-1. Safety Instructions ......................................................................................................................... 6

8-2. Inherent Drawbacks of Cordless Driver Drills Requiring Particular Attention

       During Sales Promotion ................................................................................................................. 8

9. REFERENCE MATERIALS ............................................................................................................9

9-1. Speed Control Mechanism ............................................................................................................ 9

10. REPAIR GUIDE ..........................................................................................................................10

10-1. Precautions in Disassembly and Reassembly ........................................................................... 10

10-2. Precautions in Disassembly and Reassembly of Battery Charger ............................................ 15

11. STANDARD REPAIR TIME (UNIT) SCHEDULES ......................................................................16

Assembly Diagram for DS 14DVB 

Summary of Contents for DS 14DVB
























Reviews:

No comments