Hitachi DH 40SR, Service Manual And Technical Data

Page: 36 / 37

* ALTERNATIVE PARTS
--- 6 ---
ITEM
NO.
CODE NO. DESCRIPTION REMARKS
NO.
USED
4 -- 03
DH 40SR OPTIONAL ACCESSORIES
667 955-159 CORE BIT 105MM 1 INCLUD. 668
668 955-169 GUIDE PLATE (FOR CORE BIT 105MM) 1
669 956-008 CORE BIT SHANK (B) 300L (FOR D25-35) 1
670 955-163 CORE BIT SHANK (A) 300L (FOR D38-120) 1
671 956-009 CENTER PIN (B) 147L FOR CORE BIT D32-35 1
672 955-165 CENTER PIN (A) 133L FOR CORE BIT D38-150 1
673 992-814 CORE BIT 65MM 1
674 992-815 CORE BIT 80MM 1
675 992-816 CORE BIT 90MM 1
676 992-817 CORE BIT 100MM 1
677 992-818 CORE BIT 105MM 1
678 992-819 CORE BIT SHANK (C) 1
679 903-901 CENTER PIN (C) 1
680 985-756
ANCHOR ADAPTER NO. 20 W1/4” (FOR ROTATION)
1
681 985-757
ANCHOR ADAPTER NO. 25 W5/16” (FOR ROTATION)
1
682 985-758
ANCHOR ADAPTER NO. 30 W3/8” (FOR ROTATION)
1
683 985-759
ANCHOR ADAPTER NO. 40 W1/2” (FOR ROTATION)
1
684 985-760
ANCHOR ADAPTER NO. 50 W5/8” (FOR ROTATION)
1
685 981-929 ANCHOR ADAPTER NO. 30 1
686 981-930 ANCHOR ADAPTER NO. 40 1
687 981-931 ANCHOR ADAPTER NO. 50 1
688 985-761 RATIO SHANK ADAPTER 1
689 944-574 DRIFT KEY 1
690 944-573 TURNING HANDLE 1
691 981-922
BULL POINT 280MM (ROUND SHANK TYPE)
1
692 981-923
BULL POINT 450MM (ROUND SHANK TYPE)
1
693 981-925
COLD CHISEL 280MM (ROUND SHANK TYPE)
1
694 981-926
COLD CHISEL 450MM (ROUND SHANK TYPE)
1
695 981-924 CUTTER W45 X 280L (ROUND SHANK TYPE) 1
696 956-126 SCOOP 405L (ROUND SHANK TYPE) 1
697 955-181 RAMMER 140MM 1
698 955-183 BUSHING TOOL 1
699 955-186
SHANK 250L (FOR RAMMER AND BUSHING TOOL)
1
700 320-859 SYRINGE (BLOW-OUT BULB TYPE) 1
701 318-085 SYRINGE (BELLOWS TYPE) 1
702 308-471
GREASE FOR HAMMER.HAMMER DRILL (70G)
1
703 980-927
GREASE FOR HAMMER.HAMMER DRILL (500G)
1
Printed in Japan
(030425N)