22
6. Using depth gauge (Fig. 11)
(1)Loosen the knob on the side handle, and
insert the depth gauge into the mount-
ing hole on the side handle.
(2)Adjust the depth gauge position accord-
ing to the depth of the hole and tighten
the knob bolt securely.
7. How to use the drill bit (taper shank)
and the taper shank adaptor.
(1)Mount the taper shank adaptor to the
rotary hammer. (Fig. 12)
(2)Mount the drill bit (taper shank) to the
taper shank adaptor. (Fig. 12)
(3)Turn the switch ON, and drill a hole in
prescribed depth.
(4)To remove the drill bit (taper shank),
insert the cotter into the slot of the taper
shank adaptor and strike the head of the
cotter with a hammer supporting on the
rest. (Fig. 13)
Depth Gauge
Mounting Hole
Knob on
Side Handle
1
1
1
Cotter
Rest
Taper Snank Adaptor
Fig. 13
1
Fig. 11
Drill Bit
Grip
Front Cap
Taper Shank
Adaptor
Fig. 12
Summary of Contents for DH 24VB
Page 26: ...26 ...
