INTRO PLAY
This allows introduction of each track to be played for about 10 sec.
1. Press MODE button three times, then INT is displayed.
2a. INTRO PLAY from stop condition
Select INTRO mode, press PLAY / PAUSE button to
start introduction play from track No.1 to last track.
2b. INTRO PLAY at play condition
Select INTRO mode during play, INT starts flashing.
• Press PLAY/PAUSE button, then INT flashing stops
and INTRO starts play from track No.1.
3. Press
, to start INTRO play from next track.
4. Press
, to start INTRO play from current track.
5. Press STOP button to cancel INTRO play.
PROGRAM PLAY
This allows selected tracks on the disc to be played in any desired order.
To set the program play
• Programmes can be set in the stop mode or normal play
mode.
1. Press PROGRAM button, then PRG appear and starts
flashing.
2. Press
or
to select the desired track.
3. When desired track is displayed, press PROGRAM
button to register. Then track No. display change to 00
again.
4. Repeat step 2 and 3 to program the order of more tracks.
Up to 20 tracks can be programmed into memory.
Caution:
If programmed 21 tracks and above or programmed at track No. 00 will clear
program memory.
12
Track No.
Program No.
