--- 14 ---
(9) Disassembly of the handle section
Remove the two Tapping Screws (F/Flange) D4 x 25 (Black) [61] and pull out the Grip Cover [60] backward.
Remove the four Tapping Screws (W/Flange) D4 x 30 (Black) [59] and Handle (A).(B) Set [57]. Then the
Pushing Button [66] and the power supply ass'y (DC-speed Control Switch [56], Brush Holder (B) [54], Brush
Holder (A) [65] and Terminal Support [69] are mounted) can be removed.
(10) Removal of the power supply ass'y from the Housing [52]
Disconnect the internal wire from the Housing [52] and pull out Brush Holder (B) [54] and Brush Holder (A)
[65] backward.
(11) Disassembly of the Housing [52]
Remove the two Hex. Hd. Tapping Screws D4 x 60 [50] and remove the Magnet [49].
Fig. 7
