Hitachi CPS370W C4S3, Service Manual

Page: 18 / 60

18
CP-S370W
Do not disassemble the unit
because replacement of separate
parts is not possible.
For repairs of the product, please
contact our distributor.
DISTRIBUTOR HITACHI
Replacement of G Panel Reconditioning
Return
G Panel
Before Replacing the LCD / Lens Prism
You should not replace separately the parts of the liquid crystal LCD / Lens Prism because it works properly only
when used together. Therefore, regarding these parts, you can either replace part, LCD / Lens Prism assembly, or
send the whole unit LCD / Lens Prism assembly back to HITACHI, where we will replace the malfunctioning part,
recondition the device and send it back to you. In that case please contact our distributor.
CAUTION
Incorrect handling of the battery could result in fire or personal injury. The battery may explode if
not handled properly. Be careful in handling the battery according to instructions of accompanying
manual “SAFETY INSTRUCTIONS” and this manual.
Use the 3V micro lithium battery type no.CR2025 only.
When loading the battery, make sure the plus and minus terminals are correctly oriented as
indicated in the remote control transmitter.
When you dispose the battery, you must obey the law in the relative area or country.
Keep the battery away from children and pets.
When not to be used for an extended period, remove the battery from the remote control transmitter.
Loading the Battery
First Loading:
In original packing, the battery is installed in the battery holder of
the remote control transmitter with protection film(the transparent
filmsome of which is inside the battery folder). Pull out the
protection film to load the battery.
Replacing:
1. See the reverse side of the remote control transmitter.
2. Pinch the groove and pull out battery holder as the drawing right.
3. Remove the worn battery.
4. Install the new battery with “+” side facing.
5. Push in and click the battery holder.
“+” side
Pull out
Battery Holder
NOTE:
Replace the batteries when remote control transmitter operation becomes difficult.