Hitachi CP-X608, Service Manual

Page: 43 / 111

43
CP-X608(EDX40WL)
By the control panel By the remote control transmitter
1. Display the Advanced menu by
the “MENU” button.(If EASY
MENU appears, choose “Go to
Advanced menu” to display
ADVANCED MENU.)
2. Select the “OPTION” on the
menu.
3. Continue press the button [ ]
fi rst, then press the button [ ]
together with “INPUT”, and hold
for 3 seconds.
1. Display the menu by the
“MENU” button. (If EASY
MENU appears, choose “Go to
Advanced menu” to display
ADVANCED MENU.)
2. Select the “OPTION” on the menu.
3. Press the “MAGNIFY OFF”
button.
Next hold the “MAGNIFY OFF”
button for 3 seconds.
To display the OSD for “HIDDEN SERVICE MENU” set up.
HIDDEN SERVICE
AIR-SENSOR
LAMP ALARM
1
Turn off
PJLink
SOFT RESET
STARTUP TYPE
8 M1 In EQ
4M M1 PLL Band
Auto M1 PLL Zone
Short M1 Out EQ
EXECUTE
NONE
6-14 HIDDEN SERVICE MENU
6-15 RUN TIME window
SOFT RESET
If this is executed, all of the user data is initialized.Never use it when not required.
Set operating time display method (accumulated lamp time display method)
1. Select “ OPTION” from the Advanced menu, then place the cursor on the “LAMP TIME”.
2. Press the [ ], [ENTER] or [RESET] button.
3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or
more to display the screen shown below. (The menu will close after 10 seconds if there are no further
operations.)
4. Use [ ] or [ ] to select the usage status number. (The usage status is as shown below.)
Usage status number
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
RUN TIME
LAMP Lamp time 1234 h
h
h
h NORMAL Lamp time(Normal) 1000
WHISPER Lamp time(Whisper) 234
AC 2000 AC energizing time
On Number of times on 1
Off Number of times off
No.0 Usage status number(See below)
0