background image

61

Maintenance

Inside of the projector

In order to ensure the safe use of your projector, please have it cleaned and 
inspected by your dealer about once every year.

Caring for the lens

,IWKHOHQVLVÀDZHGVRLOHGRUIRJJHGLWFRXOGFDXVHGHWHULRUDWLRQRIGLVSOD\

quality. Please take care of the lens, being cautious of handling.

1.

Turn the projector off, and unplug the power cord. Allow the projector to cool 

VXI¿FLHQWO\

2.

After making sure that the projector is cool adequately, lightly wipe the lens 
with a commercially available lens-cleaning wipe. Do not touch the lens 

directly with your hand.

Caring for the cabinet and remote control

,QFRUUHFWFDUHFRXOGKDYHDGYHUVHLQÀXHQFHVXFKDVGLVFRORUDWLRQSHHOLQJSDLQW

etc.

1.

Turn the projector off, and unplug the power cord. Allow the projector to cool 

VXI¿FLHQWO\

2.

After making sure that the projector is cool adequately, lightly wipe with gauze 
or a soft cloth.

If the projector is extremely dirty, dip soft cloth in water or a neutral cleaner 
diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a 
soft, dry cloth.

Other care 

WARNING

Ź%HIRUHFDULQJPDNHVXUHWKHSRZHUVZLWFKLVRIIDQGWKH

SRZHUFDEOHLVQRWSOXJJHGLQDQGWKHQDOORZWKHSURMHFWRUWRFRROVXI¿FLHQWO\

The care in a high temperature state of the projector could cause a burn and/or 
malfunction to the projector.

Ź1HYHUWU\WRFDUHIRUWKHLQVLGHRIWKHSURMHFWRUSHUVRQDOO\'RLQJLVVR

dangerous.

Ź$YRLGZHWWLQJWKHSURMHFWRURULQVHUWLQJOLTXLGVLQWKHSURMHFWRU,WFRXOGUHVXOW
LQD¿UHDQHOHFWULFVKRFNDQGRUPDOIXQFWLRQWRWKHSURMHFWRU

• Do not put anything containing water, cleaners or chemicals near the 
projector. 
• Do not use aerosols or sprays.

CAUTION

Ź3OHDVHWDNHULJKWFDUHRIWKHSURMHFWRUDFFRUGLQJWRWKH

IROORZLQJ,QFRUUHFWFDUHFRXOGFDXVHQRWRQO\DQLQMXU\EXWDGYHUVHLQÀXHQFH

such as discoloration, peeling paint, etc. 

Ź'RQRWXVHFOHDQHUVRUFKHPLFDOVRWKHUWKDQWKRVHVSHFL¿HGLQWKLVPDQXDO
Ź'RQRWSROLVKRUZLSHZLWKKDUGREMHFWV

Summary of Contents for CP-X505W and









































































































































Reviews: