70
Schedule Settings
(
29
)
Schedule settings can be configured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
There are three types of scheduling.
1) Daily: Perform the specified operation at a specified time every day.
2) Sunday ~ Saturday: Perform the specified operation at the specified time on a
specified day of the week.
3) Specific Date: Perform the specified operation on the specified date and time.
• In Standby mode the power indicator will flash green for approx. 3
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the projector must be plugged in and the
power indicator must light in orange or green. If the projector is unplugged or
the breaker in the room trips, the schedule function does not work.
NOTE
1) Enter
[http://192.168.1.10/]
into the address bar of the web browser.
2) Enter the Administrator ID and Password and click
[Logon]
.
3) Click
[Schedule Settings]
on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select the
[Sunday]
.
4) Click the
[Enable]
check box to enable scheduling.
5) Enter the date (month/day) for specific date scheduling.
6) Click the
[Apply]
button to save the settings.
7) Click
[Add]
to create new event. After configure the time, command and
parameters, click
[Register]
to add the new event. To return the previous
page, click
[Cancel]
button.
8) Click the
[Delete]
button when you want to delete a schedule.
4.6 Event Scheduling (Continued)
4. Utilize projector – Advanced -
