manualshive.com logo in svg

Hitachi CP-WU8460, User Manual, Page: 60 / 129

Share
Download
Hitachi CP-WU8460 User Manual Download Page 60

60

SCREEN menu

SCREEN menu

From the SCREEN menu, items shown in the table 

below can be performed.

Select an item using the ▲/▼ cursor buttons, and 

press the ► cursor button or 

ENTER

 button to 

execute the item. Then perform it according to the 

following table.

Item

Description

LANGUAGE

Using the ▲/▼/◄/► buttons switches the OSD (On Screen 

Display) language.

ENGLISH 

ó

 FRANÇAIS 

ó

 DEUTSCH 

ó

  ESPAÑOL

           (shown in the LANGUAGE dialog)   

Press the 

ENTER

 or 

INPUT

 button to save the language setting.

MENU POSITION

Using the ▲/▼/◄/► buttons adjusts the menu position.

To quit the operation, press the 

MENU

 button on the remote control 

or keep no operation for about 10 seconds.

BLANK

Using the ▲/▼ buttons switches the mode for the blank screen.

The blank screen is a screen for the temporarily blanking feature 

(

25

)

. It is displayed by pressing the 

AV MUTE

 button on the 

remote control.

MyScreen 

ó

 ORIGINAL 

ó

 BLUE 

ó

 WHITE 

ó

 BLACK

       

MyScreen :  Screen can be registered by the MyScreen item (

62

).

ORIGINAL :  Screen preset as the standard screen.

BLUE, WHITE, BLACK :  Plain screens in each color.

• To avoid remaining as an afterimage, the MyScreen or ORIGINAL

screen will change to the AUTO BLANK screen after several 

minutes.

(continued on next page)

Summary of Contents for CP-WU8460


































































































































Reviews:

No comments