17
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by wired or wireles LAN
communicaton, an external device that is connected with this projector by RS-
232C communication can be controlled from the computer as a network terminal.
For details, see the
6. Network Bridge
function in the
Network Guide
.
Network Bridge Communication
LAN
LAN cable
(CAT-5 or greater)
RS-232C
RS-232C cable
(cross)
USB wireless adapter
NOTE
• If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Connection
1.
If you use wired LAN, connect the computer's LAN port and the projector's
LAN
port with a LAN cable. Use the cable that ful
lls the speci
cation shown
in
gure. If you use wireless LAN, insert the USB wireless adapter into the
projector's
LAN
port.
2.
Connect the projector's
CONTROL
port and the RS-232C port of the devices
that you want to control with a RS-232C cable.
3.
Turn the computer on, and after the computer has started up turn the
projector on.
4.
Set the COMMUNICATION TYPE to NETWORK BRIDGE in the
COMMUNICATION menu of the OPTION - SERVICE menu.
Network Bridge Communication