5
See the top of the projector. You can see the control buttons.
Contr
Contr
ol Buttons
ol Buttons
Pr
Pr
eparing Remote Contr
eparing Remote Contr
ol
ol
AC IN
POWER indicator
tells the state of power
supply. Refer to the section
“Turning On/Off Power”.
INPUT button
toggles between
the signal ports.
MENU buttons
operate the menu function.
STANDBY/ON button
prepares for turning the power on/off. Refer
to the section “Turning On/Off Power”.
TEMP indicator
lights or blinks when any
problem about internal
temperature has happened.
LAMP indicator
lights or blinks when any
problem about the lamp has
happened.
CAUTION
Always handle the batteries with care and use them only as directed.
Improper use may result in battery cracking or leakage, which could result in fire,
injury and/or polution of the surrounding environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix
new batteries with used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly
(as indicated in the remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
RGB
VIDEO
S-VIDEO
COMPONENT VIDEO
Putting Batteries Into The Remote Control
1
Remove the
battery cover.
Slide back and
remove the battery
cover in the direction
of the arrow.
Insert the batteries.
Align and insert the two
AA batteries according to
their plus and minus
terminals (as indicated in
the remote control).
Close the battery
cover.
Replace the battery
cover in the direction
of the arrow and
snap it back into
place.
2
3
STANDBY/ON
INPUT
POWER
LAMP
TEMP
MENU
01CP-S235-QG-ENG-再校 03.12.25 2:12 PM ページ5
