55
Maintenance
Cleaning and replacing the air
fi
lter (continued)
►
Before taking care of the air
fi
lter, make sure the power cable
is not plugged in, then allow the projector to cool suf
fi
ciently. Taking care of the
air
fi
lter in a high temperature state of the projector could cause an electric shock,
a burn or malfunction to the projector.
►
Use only the air
fi
lter of the speci
fi
ed type. Do not use the projector without the
air
fi
lter or the
fi
lter cover. It could result in a
fi
re or malfunction to the projector.
►
Clean the air
fi
lter periodically. If the air
fi
lter becomes clogged by dust or the
like, internal temperatures rise and could cause a
fi
re, a burn or malfunction to
the projector.
WARNING
• Please replace the air
fi
lter when it is damaged or too soiled.
• When you replace the projection lamp, please replace the air
fi
lter. An air
fi
lter
of speci
fi
ed type will come together with a replacement lamp for this projector.
• Please reset the
fi
lter time only when you have cleaned or replaced the air
fi
lter, for a suitable indication about the air
fi
lter.
• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.
NOTE
