manualshive.com logo in svg

Hitachi CP-EX250, User Manual

Share
Download
Hitachi CP-EX250 User Manual Download Page 76

76

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference 

page

Sound does 

not come out.

The signal cables are not correctly connected.

Correctly connect the audio cables.

12, 13

The MUTE function is working.

Restore the sound pressing 

MUTE

 or 

/

-

 

button on the remote control.

20

The volume is adjusted to an extremely low level.

Adjust the volume to a higher level using the menu 

function or the remote control.

20, 46

The AUDIO SOURCE/SPEAKER setting is not correct.

Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.

46

No pictures are 

displayed.

The signal cables are not correctly connected.

Correctly connect the connection cables.

12, 13

The brightness is adjusted to an extremely low level.

Adjust BRIGHTNESS to a higher level using the menu function.

33

The computer cannot detect the projector as a Plug-

and-Play monitor.

Make sure that the computer can detect a Plug-and-Play 

monitor using another Plug-and-Play monitor.

11

The BLANK screen is displayed.

Press 

BLANK

 button on the remote control.

28

(continued on next page)

Summary of Contents for CP-EX250
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands