11
When the projector connects network, the projector can be controlled with RS-
232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table
(
&
17
).
Connection
1.
Turn off the projector and the computer.
2.
If you use wired LAN, connect the projector's
LAN
port to the computer's
LAN port with a LAN cable. Use the cable that fulfi lls the specifi cation shown
in fi gure.
3.
Turn the computer on, and after the computer has started up turn the projector
on.
LAN
LAN
LAN cable (CAT-5 or greater)
Command Control via the Network
Command Control via the Network
