Hitachi CP-734i User'S Manual And Operating Manual Download

Page: 45 / 49

Troubleshooting

Regarding the indicator lamps (continued)

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lighting

Red

Turned

off

Blinking

Red

The cooling fan is not operating.

Please turn the power off, and allow the unit to cool

down at least 20 minutes. After the projector has

sufﬁciently cooled down, please make conﬁrmation

that no foreign matter has become caught in the fan,

etc., and then turn the power on again.

If the same indication is displayed after the treatment,

please contact your dealer or service company.

Blinking

Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the unit to cool

down at least 20 minutes. After the projector has

sufﬁciently cooled down, please make conﬁrmation of

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air ﬁlter dirty?

• Does the peripheral temperature exceed 35°C?

If the same indication is displayed after the treatment,

please set the HIGH at the FAN SPEED of the item

SERVICE of the OPTION menu.

Lighting

Green

Alternative

blinking in

Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 35°C). After the treatment, resent

the power to ON.

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air ﬁlter.

Please immediately turn the power OFF, and clean

or change the air ﬁlter by referring to the section “Air

Filter”. After cleaning or changed the air ﬁlter, please

be sure to reset the ﬁlter timer. After the treatment,

resent the power to ON.

NOTE

• When the interior portion has become overheated, for safety

purposes, the power source is automatically turned off, and the indicator lamps

may also be turned off. In such a case, press the “



” (OFF) side of the power

switch, and wait at least 45 minutes. After the projector has sufﬁciently cooled

down, please make conﬁrmation of the attachment state of the lamp and lamp

cover, and then turn the power on again.

Summary of Contents for CP-734i


















































Search results

Summary of Contents for CP-734i

Reviews:

Related manuals for CP-734i

Brands by name

Popular brands

Hitachi CP-734i, User'S Manual And Operating Manual

Search results

Summary of Contents for CP-734i

Reviews:

Related manuals for CP-734i

Brands by name

Popular brands