Hitachi CMP420V1A, Operating Manual

Page: 46 / 96

PRODUCT SPECIFICATIONS (continued)
Signal Input
S-input connector pin specifications
Pin Input signal
1 Y
2 Y-GND
3 C
4 C-GND
Frame GND
Scart connector pin specifications
Pin Signal Pin Signal
1 Not Used 12 Not Used
2 AUDIO IN (RIGHT) 13 Not Used
3 Not Used 14 GND
4 AUDIO GND 15 S.VHS CHROMINANCE IN
5
Not Used
16
Not Used
6
AUDIO IN (LEFT/MONO)
17
COMPOSITE VIDEO GND
7 Not Used 18 Not Used
8 Not Used 19 Not Used
9
Not Used
20
COMPOSITE VIDEO / S.VHS LUMINANCE IN
10
Not Used
21
GND / SHIELD (CHASSIS)
11
Not Used
RGB terminal (D-sub 15-pin connector)
• When different kinds of input signals are simultaneously input to
the monitor via a graphics board or the like, the monitor will
automatically select the signals in the following priority order:
*Even in the case of the recommended signals shown on the
following page, there may be instances when correct display is
not possible. In this case, use H/V separate sync, H/V composite
sync.
Sync signal type Priority
H/V separate sync. 1
H/V composite sync. 2
sync.on Green * 3
Pin Input signal
1 R (P
R
/C
R
)
2 G or sync on green (Y)
3 B (P
B
/C
B
)
4 No connection
5 No connection
6 R.GND (P
R
/C
R
, GND)
7 G.GND (Y, GND)
8 B.GND (P
B
/C
B
, GND)
9 No connection
10 GND
11 No connection
12 [SDA]
13 H. sync or H/V composite sync
14 V.sync. [V.CLK]
15 [SCL]
( ) : With component input