Hitachi CML171SXW, User Manual

Page: 24 / 45

English.doc 2002/11/4
••
10:14
•••
95%
23
EN
G
L
ISH
The following table briefly describes each of the items in the OSD “ Main Menu ”.
Item Description
Brightness Controls the brightness of the display by adjusting the light output
of the backlight. The default setting of brightness is at
maximum(100).If you are not satisfied with the setting, you can use
the Brightness item to adjust the brightness yourself.
Contrast Adjust the level of difference between light and dark areas of the
image. The default setting of contrast is 50.If you are not satisfied
with the setting, you can use the Contrast item to adjust the
contrast yourself.
Display
Open the “ Display ” submenu where you can select horizontal (H.)
or vertical (V.) position for further adjustment.
Color
Open the “ Color ” submenu where you can select Color
Temperature, RGB and Black Level for further adjustment. See
“Doing Adjustment in the OSD Menu” on page 22.
Clock/Phase
Open the “ Clock/Phase ” submenu where you can do Auto Setup
or select Clock or Phase for further adjustment.
Management Open the “ Management ” submenu where you can select to
display mode information (Mode Info), recall factory settings,
choose language you preferred, or select OSD Display. See “Doing
Adjustment in the OSD Menu” on page 22.
Selecting Items in the OSD Menu
You can use the OSD features to change the screen settings of your display. To display
the OSD “
Main Menu ”, please press the ‘ Select ’ button.
To select items in the OSD submenus, you will use all three control buttons. To select a
specific submenu, you shall use ‘
Select ’ button to move forward to the item
corresponding to that submenu. Then you can choose any item in that submenu by
using ‘
Up ’ or ‘ Down ’ buttons, and then select it by press ‘ Select ’ button.
The following is the description of OSD Specification for CML171SX LCD Monitors with
Analog Interface:
Doing Adjustment in the OSD Menu
1. Main Menu:
Pushing ‘SELECT’ key will show-up or exit the OSD ‘ Main Menu ’. The OSD ‘ Main
Menu ’ displays as below: