Save
Adjust
Function
Status
Power LED
Power Switch
Switch
Switches Switches
Switch
POWER ON/OFF
Press the Power switch, to switch the power ON or OFF.
n
When power is ON, the power LED lights.
After turning OFF the switch, wait at least 5 seconds before restarting the
monitor.
Otherwise the monitor may operate incorrectly.
If the picture doesn’t appear, turn OFF the power switch, make sure of the
following and wait at least 30 seconds before restarting the monitor.
Make sure the power switch of the computer, power cord connection, signal
cable connection
and the input sync. signal are correct.
CONTROL
Press the Status switch. The On Screen Display function of
then
shows the selected function, its condition, the function menu and the input
signal frequencies.
You can select the
language.
. . . . . . . . . . . . . . . . . . . . . . . .
Use the function “LANGUAGE SELECT”.
To select the function, use the Function
switches.
To execute the selected function, use the
. . . . .
n
You can save the your geometry and
Sample
of
colour settings.
Refer to “SAVE” below.
To clear the
either
push the status
switch again or wait for 10
seconds.
SAVE
Press the Save switch, to save your all geometry and colour settings.
And
then “SAVED!” will appear under the function menu.
If the function “AUTO SAVE” is ON, you can save automatically at clearing the
