Hitachi CL29F60N, User Manual, Page: 18 / 22

GB - 17 -
• If you want to CONTINUE , then first by pressing the
“ ” or “ ” buttons, come to the Tuning Mode item
and select the mode at which your TV will run the
A.P.S. .
• If you select CHANNEL Tuning Mode, A.P.S. will run
according to Channel Tuning Mode and will auto-search
according to the Channel numbers of the stations in
your area.
• If you select FREQUENCY Tuning Mode, A.P.S. will
run according to Frequency Tuning Mode and will auto-
search according to the frequencies of the stations in
your area.
• Then, after selecting the Tuning Mode if you want to
start A.P.S. , by pressing the “ ” or “ ” buttons, come
to the Continue item and by pressing “ “ or “ ”
button start the A.P.S. .
• When you start A.P.S. the below menu will appear on
the screen.
$36 ,6 5811,1*
3/($6( :$,7
&$1&(/
After A.P.S. is finalized, a rank list will appear on the
screen. In the rank list you will see the programme num-
bers and names, assigned to the programmes. First
the programme with programme number 1 will be dis-
played with “
HIGHLIGHTED ” characters. Using “ ” or
“ ” or “ “ or “ ” buttons you can move the high-
lighted number and then display the programme corre-
sponding to the highlighted number.
If you do not accept the correspondence between
programme numbers and names and want to change
them, press “ MENU ” button and then BLUE button, so
that you enter the Installation menu.
Other Features
TV Status
Programme Number , Programme Name (or AV ) and
Sound Indicator are displayed on the upper left of the
screen. They are displayed after programme change
during 3 seconds.
3
Programme Number
35
Programme Name (4 characters)
These OSD’s are displayed when a new programme is
entered by digit button, by pressing “ ” or “ ” button,
or by “ TV ” button.
Double-digit (- -)
This OSD is displayed when the "Double-Digit" button
pressed in place of the programme number indicator.
After then, in order to enter a programme it must be
pressed to two digit consecutively. When it is late to
press any digit button this function will be ignored and
the display will be erased. In the same way it must not
be late to press any digit button after entering the first
digit. The limit of the delay time is 3 seconds.
Sound Indicator
This is a stereo option. The alternatives of the indicator
are Mono, Stereo, Dual-I and Dual-II. This indicator is
displayed under the programme number indicator on the
screen. " I-II " button is used to select Mono, Stereo,
Dual-I or Dual-II.
In Mono broadcast or in forced-mono (for stereo broad-
cast).
In Stereo broadcast.
If dual broadcast detected. Dual-I is selected in default
and also can be selected after Dual-II by Remote Con-
trol.
'8$/,
If Dual-II selected by Remote Control.
01-2985MAV-1244UK-ENG-ST7P-AK45-MULTI-PLL-FS-RF-TILT-CLED-50052077.p65 13.07.2004, 11:31 17