Hitachi CJ 14DL, Technical Data And Service Manual

Page: 22 / 44

-19-
7. Removal of the roller holder
(1) Remove the two Retaining Rings (E-Type) for D3 Shaft [55] from the Pin [45] .
(2) Pull out the Needle Roller [43] press-fitted in the Gear Holder [38] and remove the Roller Holder [44] .
(3) Remove the Needle Roller [43] remained in the Gear Holder [38] .
8. Removal of the change knob
(1) Remove the Retaining Ring (E-Type) for D5 Shaft [39] , and remove the Change Knob [48] ,
Spring (C) [49] and Steel Ball D3.97 [50] .
(2) Be careful not to lose Spring (C) [49] and the Steel Ball D3.97 [50] .
Removal of the roller holder
Gear Holder [38]
Roller Holder [44]
Needle Roller [43]
Pin [45]
Retaining Ring (E-Type) for D3 Shaft [55]
Removal of the change knob
Steel Ball D3.97 [50]
Spring (C) [49]
Change Knob [48]
Retaining Ring (E-Type)
for D5 Shaft [39]