background image

6

MEANINGS OF SYMBOLS

NOTE:

 Some units do not carry them.

Symbols

WARNING

The following show symbols used for the machine. Be sure that you understand their meaning before use.

Grass Trimmer / Brush Cutter

Priming pump

It is important that you read, fully understand 

and observe the following safety precautions 

and warnings. Careless or improper use of the 

unit may cause serious or fatal injury.

Guaranteed sound power level

Read, understand and follow all warnings and 

instructions in this manual and on the unit.

Blade thrust may occur when the spinning 

blade contacts a solid object in the critical area. 

A dangerous reaction may occur causing the 

entire unit and operator to be thrust violently.

This reaction is called blade thrust. As a result, 

the operator may lose control of the unit which 

may cause serious or fatal injury. Blade thrust is 

more likely to occur in areas where it is di

  cult 

to see the material to be cut.

Always wear eye, head and ear protectors when 

using this unit.

Do not use metal/rigid blades when this sign is 

shown on the unit.

Hot Surface – Contact with hot surface can 

cause serious burns.

Keep all children, bystandards and helpers 

15 m away from the unit. If anyone approaches 

you, stop the engine and cutting attachment 

immediately.

The hedge trimmer attachment cannot be used 

on models with this label.

Be careful of thrown objects.

Indicate handle location. Arrows which show 

limits for handle positioning.

min

-1

Shows maximum shaft speed. Do not use the 

cutting attachment whose max rpm is below the 

shaft rpm.

Displacement

Gloves should be worn when necessary, e.g., 

when assembling cutting equipment.

Spark plug

Use anti-slip and sturdy footwear.

Idle

Idling speed

Choke – Run position (Open)

Speed of output shaft

Choke – Start position (Closed)

P

Max. engine output 

On/Start

Fuel tank capacity 

O

 /Stop

Dry weight (without fuel, cutting attachment, 

harness and cutting attachment guard)

Emergency stop

Cutting attachment

Fuel and oil mixture

L

pA, eq

ISO22868

Sound pressure level LpA by ISO 22868 

Equivalent*

Idle speed adjustment

L

WA, Ra(M)

2000/14/EC

Measured sound power level LwA by 2000/14/

EC

Racing

000Book̲CG24EC(S).indb   6

000Book̲CG24EC(S).indb   6

2016/04/07   14:55:24

2016/04/07   14:55:24

Summary of Contents for CG 24EC (SL)





















Reviews: