32
MULTI PICTURE
Ǐ
P in P
ǐ
Follow the steps on page 20 to enter the
Function
menu and
then select the
Multi Picture
option as shown on the right.
Press the
Ż Ź
cursor buttons to set the
Multi Picture
option to
P in P
mode, then exit from the menu.
ƽ
In normal TV mode, press the
MULTI PIC.
button to
enter the
P in P
mode as shown below. The picture A and
B will show two programs of two channels respectively.
ƽ
Once you enter the
P in P
mode, press the
A/B
button to
select any one of the two pictures and the red
symbol will appear on the top of the selected
picture, indicating:
˄
1
˅
The speakers on this TV output the sound from the
selected picture.
˄
2
˅
The monitor out terminals output audio and video
signals from the selected picture.
˄
3
˅
The operations such as program selection, etc. are
valid for the selected picture. However, the program No.
selected in one picture can not be the same as that in the
other one. Otherwise the characters
! Not Available
will
appear.
Notes:
˄
1
˅
When the
RECALL
button is pressed, the picture A and B will display their respective program No.
instantly, and the red symbol will appear on the top of the selected picture momentarily.
˄
2
˅
If the
HP Select
option in the
Function
menu is set to
B
, the headphone terminal of side panel always
outputs the sound from the picture
B
. If the
HP Select
option in the
Function
menu is set to
A/B
, the
headphone terminal of side panel always outputs the sound from the selected picture.
ƽ
After accessing the
P in P
mode, you can press the
SWAP
button to switch between the two pictures, ie, to
exchange the program sources in the picture A and B.
ƽ
Press the
POSITION
button to move the picture B on the screen in sequence as shown above. Do not fix the
picture B on a particular position of the screen for a long time, or else, it will damage the PRT.
ƽ
In the
P in P
mode, you can press the
MULTI PIC.
or the
RETURN
button to exit.
ƽ
In the
P in P
mode
ˈ
you may enter the
Audio
menu by pressing the
MENU
button to make adjustment. When
entering other menus such as
Picture
, it will exit from the
P in P
mode.
Note:
Not all input signal formats are valid for
P in P
. Even if the signal may be displayed in TV mode before
entering
P in P
, it may not be displayed while in the
P in P
mode. In such case, the characters
! Invalid
Signal
will appear in the picture A, or the
!
symbol will appear in the picture B. This is normal.
䗝乍
Ϟϔ义
䆒ᅮ
)XQFWLRQ
6FDQ0RGH
3URJUHVVLYH
'HFRUDWLYH/LJKW
2II
0XOWL3LFWXUH
3LQ3
796FDQ
)UHH]H
6WLOO
+36HOHFW
$%
5HVHW
6HOHFW
6HW
5HWXUQ
ź
Ź
A
B
