Hitachi C43-FD5000, Service Manual

Page: 29 / 123

29
SERVICE ADJUSTMENTS
2) If the Adjustment point is not on center, by press cursor key on R/C, then Convergence Data of all of
one line include existing Adjustment Point Marker are exchanged at the same time.
ex) Fig.5 (Fig.6) : By press [
↑
] ([
←
]) key on R/C, move up
(left) RED convergence data of all of horizontal (vertical)
line include existing Adjustment Point Marker.
c) Press [ SUB ] key on R/C again to exit RATER POSITION ADJUSTMENT MODE.
Adjustment point
NOTE : PAL mode can be confirmed by extra horizontal lines.
Adjustment point
9 x 13 = 117 point
Adjustment point (NTSC 60p mode)
Extra horizontal line
Adjustment point
9 x 13 = 117 point
Adjustment point (PAL 50p,PAL 100i mode)