Hitachi C28WF532N Instruction Manual Download Page 34

Page: 34 / 40

Language

This enables you to change the language of the On Screen Displays. Please see below for details.

language and installation

other features

Press the MENU button. The

MAIN MENU appears.

Press the cursor DOWN

button to select INSTALL.

Once highlighted, accept

selection.

Press the cursor DOWN

button to select LANGUAGE.

Adjust to your chosen

language using the LEFT/RIGHT

cursor buttons.

To return to normal TV operation press the TV button on

your handset.

REPEAT STEPS 1 - 3 ABOVE.

Press the cursor DOWN button to select

INSTALLATION.

Once highlighted, accept selection.

Installation

This enables you to repeat the Autotune installation if required, e.g. if you move house etc.

Please now turn to ‘automatic tuning procedure’, found in the ‘tuning in’ section of

this manual, and follow the instructions, starting from STEP 4 and continuing through

to STEP 7.

important note on Installation

Do not switch your TV on until all external equipment is connected. If you have a Video

Cassette Recorder or a Satellite receiver connected to this TV please ensure that they

are switched on before automatic tuning begins. In the case of a VCR, if it is not Viewlink

compatible, insert a pre-recorded tape and begin playback of your equipment. If it is Viewlink

compatible leave VCR in Standby. (See

Viewlink

section of this manual for details). With a

Satellite receiver select Sky News. These measures ensure that all your external equipment is

tuned in during the autotune procedure.

Summary of Contents for C28WF532N









































Search results

Summary of Contents for C28WF532N

Reviews:

Related manuals for C28WF532N

Brands by name

Popular brands

Hitachi C28WF532N, Instruction Manual

Search results

Summary of Contents for C28WF532N

Reviews:

Related manuals for C28WF532N

Brands by name

Popular brands