Hitachi C14D24 Instructions For Use Manual Download Page 50

Page: 50 / 53

- 49 -

Some functions (Angle, Zoom etc) do not work

These functions are not available on the DVD.

Angle can only be changed when the angle symbol is displayed.

No picture

Have you pressed the correct buttons on the remote control? Try once more.

No sound

Check the volume is set to an audible level.

Make sure you have not switched the sound off accidentally.

Distorted sound

Check that the appropriate listening mode setting is correct.

No response from remote control

Make sure the remote control is in the correct mode.

Check batteries are fitted correctly.

Change the batteries.

If nothing works

If you have tried the above solutions and none seem to work, try switching your TV-DVD off

and on again. If this does not work, contact your supplier or TV-DVD repair technician.

Never attempt to repair a defective TV-DVD yourself.

Summary of Contents for C14D24






















































Search results

Summary of Contents for C14D24

Reviews:

Brands by name

Popular brands

Hitachi C14D24, Instructions For Use Manual

Search results

Summary of Contents for C14D24

Reviews:

Brands by name

Popular brands