--- 8 ---
(2) Replacement of the Ball Bearing 608VVC2PS2L [23] (See Fig. 9.)
When replacing the Ball Bearing 608VVC2PS2L [23] only, ensure that Washer (A) [24] is reassembled in the
proper direction and there is a clearance between the Ball Bearing 608VVC2PS2L [23] and Washer (A) [24].
Fig. 8
8-2. Reassembly
Cautions on installation
Reassembly can be accomplished by following the disassembly procedures in reverse. However, particular
attention should be given to the following points:
(1) Assembling the Bearing Lock [21] and the Thrust Washer [22] (See Fig. 8.)
Before installing the Armature [29], be sure to install the Bearing Lock [21] and Thrust Washer [22] in the
bearing chamber of the Housing Ass'y [20] in this order. When installing the Thrust Washer [22], be sure to
note its assembling direction.
Installation order
Rubber side
Steel washer side
(3) Assembling the Rubber Ring [50]
When installing the Rubber Ring [50], be careful not to damage the bearing chamber groove of the Gear
Cover Ass'y [35].
Fig. 9
Clearance
[24]
[23]
[22]
[21]
[20]
Summary of Contents for C 6MFA
Page 24: ......
