--- 8 ---
Fig. 8
8-2. Reassembly
Cautions on installation
Reassembly can be accomplished by following the disassembly procedures reverse. However, particular
attention should be given to the following points:
(1) Assembling the Bearing Lock [18] and Thrust Washer [19] (See Fig. 8.)
Before installing the Armature [24], be sure to install the Bearing Lock [18] and Thrust Washer [19] in the
bearing chamber of the Housing Ass'y [17] in this order. When installing the Thrust Washer [19], be sure to
note its assembling direction.
(2) Assembling the Rubber Ring [27]
When installing the Rubber Ring [27], be careful not to damage the bearing chamber groove of the Gear
Cover Ass'y [29].
Installation order
Steel washer side
Rubber side
[17]
[19]
[18]
Summary of Contents for C 6MF
Page 32: ......
